The 2018 Coleman Lantern 286RK has a standard 4" x 4" rear bumper so I recommend the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100. This would be the only bolt-on option or one like it since there aren't any pre-drilled holes in the frame to attach it that way. You may need to move the spare tire over to fit the trailer hitch if present. view full answer...
Your 2019 Dutchmen Coleman Lantern LT Travel Trailer was pre-wired for a Furrion observation camera system like the part # FOS43TASF that you referenced. If you go with the 5 inch display version part # FOS05TASF you can have side cameras added with the Furrion Vision S Side Camera w/ Marker Light Bracket # FCE48TASL so this would be what I recommend. view full answer...
It does seem to be a trend that RV bumpers are getting flimsier due to cheaper/thinner materials, so I completely understand not trusting it to carry your expensive e-bike.
What I recommend is the bolt on Curt # 13703 which fits frames that are up to 72" wide so it'll fit your 2021 Dutchmen Coleman Lantern 17B just fine.
You'll then want to make sure you're using a Travel Trailer rated bike rack for your e-bike as most bike racks are not rated for the extra force on the back of a travel... view full answer...
A common faucet option in travel trailers such as yours is the Flow Max RV Kitchen Faucet, # LC719325. This is made by Lippert who is a supplier to OEM's. This may be similar to what you have. The Flow Max, # LC719325 does have the ability to replace the cartridge, which is a common cause for dripping faucets. Lippert uses the type-A (Lippert part Number, 2021025928) for this faucet. This is an easy DIY install, I suggest a replacement of the current faucet with the Flow Max if you cannot... view full answer...
The 2021 Dutchmen Coleman Lantern 263BH measures 30.5' long end to end. In order to find the correct cover for this, you'll need to subtract 3' for the tongue. I recommend the Adco Olefin HD RV Cover for Travel Trailers part # AD87ZR which works in all climates. The Adco Olefin has weighted buckles for an easier installation, zippered panels for entry while in use, and cinch ropes for a tight custom like fit. view full answer...
Yes, this is possible. You will just need to measure the distance between the frame on your 2021 Coleman Lantern 17B.
The Adjustable Width Trailer Hitch Receiver # C13702 fits frame widths between 18" and 51". The Adjustable Width Trailer Hitch Receiver # 13703 fits frame widths between 22" and 72". Either option can be bolted or welded on and will provide you with enough weight capacity to carry your 200 lb. grill in a cargo carrier.
I am not sure what the size of your grill is, but... view full answer...
Trailer wheel and tire combos do not come balanced...but they do come mounted! The Kenda Karrier ST215/75R14 # AM32182 would be a great choice and would be ready to be used as a spare but it's not balanced. Trailer tires don't generally get balanced as it doesn't make a noticeable difference and in a lot of cases the weights end up falling off due to the rougher suspension. So there would be no need to have these balanced when you get them. view full answer...
Go To Results